AlfaOBD Demo

Demo version of AlfaOBD software for diagnostics of the cars produced by FCA: Alfa-Romeo, Fiat, Lancia, Dodge, RAM, Chrysler, Jeep. Peugeot (Boxer), Citroen (Jumper) are also covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available in the full version.

NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.

Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.

NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.

For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD features include:

- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars.

- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots

- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable

- clearing of fault codes

- (Full version only) active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs

- (Full version only) electronic key and RF remote control programming

AlfaOBD supports ELM327 and OBDKey Bluetooth interfaces on all Bluetooth-enabled Android devices and ELM327/OBDKey WLAN interfaces on rooted devices only. For details of configuration of connection to interface and car see application help.

Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via Setting.

The limitations of the demo version are:

- Application run time limit of 15 minutes. Application reverts back to the first screen after 15 minutes of connection to a control unit.

- No active diagnostic procedures available

- The number of scanned gauges is limited by four

- The number of monitored parameters is limited by four

All other features are operational. No time limit is imposed on the application.

NOTE: If plots are not updated, make sure that "Force GPU rendering" is off in "Settings"->"Developer Option".

阿尔法 - 罗密欧，菲亚特，蓝旗亚，道奇RAM，克莱斯勒，吉普：由FCA生产的汽车诊断软件AlfaOBD试玩版。标致（义和团），雪铁龙（跳线）也包括在内。虽然软件主要是针对有车一族，它提供的专业扫描仪的功能。许多交易商级的诊断和配置过程是完整版。

注意：如果您的Android设备是不是在谷歌上播放的兼容设备列表中，您无法安装或升级安装，请联系info@alfaobd.com。

请确保你有一个兼容的OBD接口。有关支持的OBD接口列表中看到www.alfaobd.com。

注意：如果AlfaOBD无法连接到汽车ECU消息“界面报告无数据”或“界面报告可以将错误”很可能意味着你的界面不兼容或有缺陷。

对于连接的配置的细节的接口和车载看到应用程序的帮助可在http://www.alfaobd.com/AlfaOBD_Android_Help.pdf

AlfaOBD功能包括：

- 在菲亚特集团汽车使用的电子控制单元的原生支持。原生支持，提供通用的OBDII支持仅限于菲亚特集团汽车的许多其它诊断应用程序的不同AlfaOBD。

- 监视发动机，变速箱，ABS，气候控制ECU和图形呈现的各种动态参数曲线

- 静态数据的读取：ECU识别，系统状态，有可能的原因和环境信息，在适用情况下故障码

- 故障代码清除

- （全版本）活性的诊断和配置过程由发动机，变速箱，车身计算机，气候控制，ABS，安全气囊，控制码和其它ECU控制各种设备

- （全版本）电子钥匙和RF遥控编程

AlfaOBD支持所有具备蓝牙功能的Android设备和ELM327 / OBDKey WLAN接口上只有扎根设备ELM327和OBDKey蓝牙接口。对于连接的配置细节的接口和车载见应用帮助。

提供捷克语，英语，法语，德语，匈牙利语，意大利语，波兰语，葡萄牙语，俄语，土耳其语和西班牙语中的应用。语言是通过设置选择。

演示版的限制为：

- 15分钟应用运行时间限制。 15分钟连接到控制单元的应用之后恢复到所述第一屏幕。

- 有没有有效的诊断方法

- 扫描仪的数目由四个限制

- 监控参数的数目由四个限制

所有其他功能都正常运行。没有时间限制被施加到应用程序。

注意：如果没有更新的地块，确保“强制GPU渲染”是关在“设置” - >“选项开发”。